P02HP30 - Acopian P02HP30 High Voltage AC DC Power Supplies. Output Range...
Request Quote
For Price
- Part Number:
- P02HP30
- Model Number:
- P02HP30
- Make:
- ACOPIAN
- Lead Time:
- Available
- Qty In Stock:
- Available
Acopian P02HP30 High Voltage AC DC Power Supplies. Output Range kVdc 0-2 | Output Current mA 30 | Rack Mounting Regulated Simple Type: Power Supply
Ideal for laboratory and instrumentation applications, these rack mounting supplies feature calibrated ten-turn controls (with locking vernier dials) for precisely setting voltage and current. Voltmeter, ammeter and handles are standard.
For Resellers and High Volume Orders:
Please request a quote to obtain preferred pricing.
Features
- Front panel adjustment controls with locking vernier dials
- Input protection
- Output programming
- Output protection
- Remote monitoring of output current
- Remote monitoring of output voltage
- Standard Voltmeter and ammeter
Specifications
- Ambient operating temperature: –10 to +60°C | No derating required
- Current MonitorTerminal: Permits remote monitoring of output current, at mV/mA ratio shown. Accuracy is 2% of maximum rated output current
- Humidity: Maximum of 90% relative, non-condensing
- InhibitTerminal: Grounding inhibits output
- Input Current: 30 watt output ratings: 0.6A | 60 watt output ratings: 1.2A
- Input Protection: “Soft start” circuit minimizes start-up power stresses
- Input, Control and Monitoring: Screw terminals
- InputVoltage: 105-125 VAC, 50-400 Hz, single phase.
- Metering: Voltmeter and ammeter are standard. Accuracy is 2% of full scale
- Output: High voltage connector (Type varies with model number)
- Output Controls: Voltage and current may be controlled by means of two 10-turn front panel adjustments with locking vernier dials. Control linearity is 1% of full rated output. Calibration accuracy is 1% of rated output plus 1% of setting. (Remotely located 1000 ohm potentiometers may alternately be used for output control)
- Output Polarity: Positive output is standard. For negative output, change first letter of model number from P to N
- Output Programming: Output voltage and current may be programmed from 0 to full rating by means of control voltage inputs of 0 to +5.1 Vdc, ±2%
- Output protection: Current regulation circuit protects power supply from short circuits, overload, and arcing
- Regulation (constant current operation): (Line) ±0.1% | (Load:)±0.1% plus 50 µA
- Regulation (constant voltage operation): (Line) ±0.05% | (Load) ±0.05%
- Response Time: Less than 5 mS for 100 µA load step change
- Ripple: 0.05%, peak-to-peak
- STABILITY: 0.05% over eight hours, after 30 minute warmup
- StorageTemperature: –20 to +85°C
- Temperature Coefficient: 200 PPM/°C equals 0.02%/°C (Typical)
- Voltage Monitor Terminal: Permits remote monitoring of output voltage, stepped down by ratio shown.Accuracy is 2% of maximum rated output voltage
Applications
- None Available
Aliases
- None Available