5E10E65 - Acopian 5E10E65 DC-DC Converters. Nominal Input Voltage: 5 | Nominal...
Request Quote
For Price
- Part Number:
- 5E10E65
- Model Number:
- 5E10E65
- Make:
- ACOPIAN
- Lead Time:
- Available
- Qty In Stock:
- Available
Acopian 5E10E65 DC-DC Converters. Nominal Input Voltage: 5 | Nominal Output Voltage: 10 | Case Size: ESC-10 | Single Output, For PC Board Mounting Simple Type: DC/DC Converter
These versatile DC-DC Converters are ideally suited for powering a wide variety of analog and digital circuitry, such as op amps, logic and microprocessors. They may be mounted directly on a printed circuit board for OEM applications, or installed in a socket for developmental and small quantity requirements. For DC-DC Converters with screw terminals. Efficiency is in the order of 65%, and is maintained down to low levels of output current. Input reflected ripple is reduced to less than 1% by means of a standard built-in pi filter, and electrostatic shielding on all six sides minimizes radiated energy. High input/output isolation permits separation of the output from the dc input bus to minimize circuit interaction due to ground loops, and the use of inputs in either polarity.
For Resellers and High Volume Orders:
Please request a quote to obtain preferred pricing.
Features
- None Available
Specifications
- Ambient operating temperature: –20 to +71°C
- Humidity: 20% to 80% R.H. (non-condensing)
- Input Reflected Ripple: 1% Ein (max.)
- Input Voltage: Nominal voltage ±10%
- Input/output isolation: Voltage: 500 Vdc | Resistance: 100 megohms | Capacitance: 100 pF
- Mounting: May be mounted on printed circuit board or in socket
- Output Regulation: (Line) ±0.02% | (Load) ±0.05%
- Output Ripple (@ 25 MHz bandwidth): 1 mV rms, 50 mV p-p (5-15V outputs) | 1.5 mV rms, 75 mV p-p (18-28V outputs)
- Output Voltage Setting: Outputs are factory preset to within ±1% of the nominal output voltage
- Overload/Short Circuit Protection: Electronic current limiting with automatic recovery. Models in case size ELC-10 also have thermal protection with automatic reset
- Polarity: The output of single output models may be connected in either polarity. Dual output models have a positive/common/negative output terminal configuration
- Storage Temperature: –40 to +85°C
- Switching Frequency: 20 kHz minimum
- T/C Terminal: For single output models, the T/C terminal can be used to trim the output more precisely to the nominal voltage rating by connecting an external resistor from theT/C terminal to either the + or – terminal. For dual output models, the T/C terminal is the output common
- Temperature Coefficient: 0.02%/°C (Typical)
- Transient Respons (NL-FL): 50 microseconds
Applications
- None Available
Aliases
- None Available