ACOPIAN Industrial Partner

40EB06 - Acopian 40EB06 Power Module. Mini Encapsulated AC-DC Power Module with...

larger image

Request Quote
For Price
Part Number:
Model Number:
Lead Time:
Qty In Stock:

Acopian 40EB06 Power Module. Mini Encapsulated AC-DC Power Module with Screw Terminals | Single Output | Nominal Output Voltage: 40 | Output Current Amps: 0.060 | Case Size: EB-13 Simple Type: Power Module

Although small in size, these mini-modules offer high performance at modest prices. All models, with series regulated outputs ranging from 1 to 75 volts and as high as 2.5 amps, may be mounted in an area only 3.5" x 2.5". Dual output models are available with the ratings commonly required for driving op amps and other balanced loads. Terminal strip input/output connections eliminate all need for sockets or soldering. Short circuit protection, encapsulated construction, and conservative design assure long term reliability.

Download the datasheet (PDF)

For Resellers and High Volume Orders:
Please request a quote to obtain preferred pricing.


  • Encapsulated construction
  • May be used in series
  • No derating or heat sinking required
  • Short circuit protected
  • Small, lightweight
  • With screw terminals


  • Ambient operating temperature: –20 to +71°C | No derating required
  • Impedance: 0.07 ohms at 1 kHz and 0.2 ohms at 10 kHz (approx)
  • Input Voltage: 105-125 VAC, 47 to 420 Hz, single phase
  • Mounting: Threaded mounting holes permit mounting to a chassis, cabinet wall or bracket, or they may be used on a test bench or tabletop. When wall-mounting or DIN rail mounting is desired
  • Output Voltage Setting: Outputs are factory preset to within ±2% (1 to 9 volt models) or ±1% (10 to 75 volt models) of the nominal output voltage
  • Polarity: Either positive or negative terminal of a single output module may be grounded. Dual output modules have a positive/common/negative output terminal configuration
  • StorageTemperature: –55 to +85°C
  • T/C Terminal: For single output models, the T/C terminal can be used to trim the output more precisely to the nominal voltage rating by connecting an external resistor from theT/C terminal to either the + or – terminal. For dual output models, the T/C terminal is the output common
  • Temperature Coefficient: From 9 to 75 volts, typically 0.015%/°C; 1 to 8 volts, 0.03%/°C



  • None Available


  • None Available